Part Details | SHOULDERED SHAFT
3040-00-808-7441 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 3040008087441, 388Q1109, 11621145, 3040-00-808-7441, 00-808-7441, 3040008087441, 008087441
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 08, 1968 | 00-808-7441 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
SPLINED (STRAIGHT)
TAPERED WITH FLAT
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-808-7441
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3040008087441 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| 388Q1109 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS LLC |
| 11621145 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-808-7441
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | 9$DST0137 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 350.0 MICROINCHES |
| FIRST END DIAMETER | 1.7719 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.969 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 1.4830 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 1.7719 INCHES NOMINAL |
| FIRST END SPLINE QUANTITY | 17 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 5 TAPERED WITH FLAT |
| SECOND END DIAMETER | 1.0000 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.1563 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.344 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.813 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 1.000 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 2.994 INCHES NOMINAL |
| OVERALL LENGTH | 14.563 INCHES NOMINAL |
| STEP QUANTITY | 6 |
| SPECIAL FEATURES | CENTER SPLINED 2.994 IN. MAJOR DIA,2.520 IN. MINOR DIA,20 DEG PRESSURE ANGLE,17 TEETH;2NT END HAS SECOND HOLE SAME AS STYLE AT 90 DEG TO 1ST HOLE |