Part Details | SHOULDERED SHAFT
3040-00-822-8630 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 216048, 3040-00-822-8630, 00-822-8630, 3040008228630, 008228630
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-822-8630 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
CIRCULAR GROOVED
INTERNAL THREADED
CIRCULAR GROOVED
INTERNAL THREADED
Cross Reference | NSN 3040-00-822-8630
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 216048 | 82577 | RAYTHEON COMPANYDBA RAYTHEON |
Technical Data | NSN 3040-00-822-8630
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | STEEL COMP 303SE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 303SE MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0400 INCHES MINIMUM AND 0.0450 INCHES MAXIMUM |
| FIRST END GROOVE DIAMETER | 0.2100 INCHES MINIMUM AND 0.2200 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 0.1850 INCHES NOMINAL |
| FIRST END DIAMETER | 0.2454 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 INTERNAL THREADED |
| SECOND END KEYWAY WIDTH | 0.0500 INCHES NOMINAL |
| SECOND END KEYWAY DEPTH | 0.035 INCHES NOMINAL |
| SECOND END DIAMETER | 0.3300 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.2493 INCHES MINIMUM AND 0.2496 INCHES MAXIMUM |
| SECOND END HOLE DEPTH | 0.425 INCHES NOMINAL |
| SECOND END STEP LENGTH | 0.232 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| SECOND END TAPER | 0.0000 PER FOOT IN INCHES |
| LARGEST STEP DIAMETER | 0.9680 INCHES MINIMUM AND 0.9685 INCHES MAXIMUM |
| OVERALL LENGTH | 1.024 INCHES NOMINAL |
| STEP QUANTITY | 3 |