Part Details | SHOULDERED SHAFT
3040-00-827-0374 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 11689406, 7176463, 717646-3, 3040-00-827-0374, 00-827-0374, 3040008270374, 008270374
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | AUG 23, 1967 | 00-827-0374 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-827-0374
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 11689406 | 19204 | ARMY, UNITED STATES DEPARTMENT OFTHE |
| 717646-3 | 20418 | DRS SUSTAINMENT SYSTEMS, INC.Use CAGE Code 98255 for cataloging |
Technical Data | NSN 3040-00-827-0374
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 1.2490 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 7 PLAIN |
| SECOND END DIAMETER | 0.9834 INCHES MINIMUM AND 0.9838 INCHES MAXIMUM |
| SECOND END WIDTH ACROSS FLATS | 0.649 INCHES NOMINAL |
| SECOND END STEP LENGTH | 1.432 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.212 INCHES MINIMUM AND 1.220 INCHES MAXIMUM |
| OVERALL LENGTH | 3.170 INCHES MINIMUM AND 3.230 INCHES MAXIMUM |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | 1 FLANGE,3.080 IN. DIA,4 MOUNT HOLES 0.263 IN. DIA,1.125 IN. CTOC DISTANCE BETWEEN HOLES ON A 2.250 IN. DIA |