Part Details | SHOULDERED SHAFT
3040-00-831-1195 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: GC1839E, 3040-00-831-1195, 00-831-1195, 3040008311195, 008311195
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1962 | 00-831-1195 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLAT KEYWAY
SPLINED (STRAIGHT)
FLAT KEYWAY
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-831-1195
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| GC1839E | 70763 | HALDEX HYDRAULICS CORP |
Technical Data | NSN 3040-00-831-1195
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 0.7600 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.687 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.7000 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.7600 INCHES NOMINAL |
| FIRST END SPLINE QUANTITY | 20 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 1 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.0310 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.4390 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.565 INCHES NOMINAL |
| SECOND END DIAMETER | 0.4390 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.1360 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.655 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 0.156 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.760 INCHES NOMINAL |
| OVERALL LENGTH | 5.187 INCHES NOMINAL |
| STEP QUANTITY | 2 |