Part Details | SHOULDERED SHAFT
3040-00-832-6362 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 11697001, 3040-00-832-6362, 00-832-6362, 3040008326362, 008326362
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 10, 1967 | 00-832-6362 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-832-6362
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 11697001 | 19204 | ARMY, UNITED STATES DEPARTMENT OFTHE |
Technical Data | NSN 3040-00-832-6362
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624,COMP 8620 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0300 INCHES MINIMUM AND 0.0500 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 0.4400 INCHES MINIMUM AND 0.4600 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.114 INCHES MINIMUM AND 0.118 INCHES MAXIMUM |
| SECOND END DIAMETER | 0.7100 INCHES MINIMUM AND 0.7300 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 2.542 INCHES NOMINAL |
| OVERALL LENGTH | 2.688 INCHES MINIMUM AND 2.690 INCHES MAXIMUM |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | UNTHREADED CROSS DRILLED HOLE,0.125 IN. MIN.-0.129 IN. MAX. DIA,LOCATED 1.279 IN. LG. FROM SECOND END STYLE TO CENTER OF HOLE |