Part Details | SHOULDERED SHAFT
3040-00-833-5329 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 19896281, 1989628-1, 3040-00-833-5329, 00-833-5329, 3040008335329, 008335329
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 08, 1967 | 00-833-5329 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLAT KEYWAY
PLAIN
FLAT KEYWAY
Cross Reference | NSN 3040-00-833-5329
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1989628-1 | 94580 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
Technical Data | NSN 3040-00-833-5329
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | ALUMINUM ALLOY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250,COMP 2024,TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 1.0400 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 1 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.0400 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.5940 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.275 INCHES NOMINAL |
| SECOND END DIAMETER | 0.6230 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.2040 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 1.035 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 0.562 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.120 INCHES NOMINAL |
| OVERALL LENGTH | 3.300 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | 1ST END HAS 4 INT. THD HOLES 0.190 IN. DIA 0.750 IN. D,10 AND 32 UNF 2B THD DES,ALT SPACED AT 60 AND 120 DEG APART ON 0.750 IN. DIA BOLT CIRCLE; 2ND END 2ND CROSSDRILLED HOLE DISTANCE BETWEEN CTRS 0.500 IN.,BOTH HOLES COUNTERBORED 0.318 IN. DIA 0.152 IN. D; 2ND END FLAT GROOVED 0.558 IN. D AND 0.840 IN. LG,0.865 IN. FROM END |
| FSC APPLICATION DATA | AUTOMATIC PILOT SERVO CONTROLS |