Part Details | SHOULDERED SHAFT
3040-00-854-0262 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: APC2481790, 2481790, APC2481790, 3040-00-854-0262, 00-854-0262, 3040008540262, 008540262
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 11, 1967 | 00-854-0262 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-854-0262
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| APC2481790 | 32970 | AIRCRAFT PARTS CORPORATION |
| 2481790 | 99551 | GOODRICH CORPORATIONDIV POWER TRANSMISSION SYSTEMS |
| APC2481790 | 95270 | SKURKA AEROSPACE INC. |
Technical Data | NSN 3040-00-854-0262
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 0.850 INCHES MINIMUM AND 0.870 INCHES MAXIMUM |
| FIRST END SPLINE MINOR DIAMETER | 0.5000 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 0.6000 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 12 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.8620 INCHES MINIMUM AND 0.8670 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.830 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.6710 INCHES MINIMUM AND 0.6990 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.8620 INCHES MINIMUM AND 0.8670 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 0.8000 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 16 |
| LARGEST STEP DIAMETER | 0.905 INCHES MINIMUM AND 0.925 INCHES MAXIMUM |
| OVERALL LENGTH | 2.790 INCHES MINIMUM AND 2.810 INCHES MAXIMUM |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| END ITEM IDENTIFICATION | T-38 ACFT |