Part Details | SHOULDERED SHAFT
3040-00-870-6252 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 3010008706252, 10908275, 3040-00-870-6252, 00-870-6252, 3040008706252, 008706252
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1962 | 00-870-6252 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-870-6252
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3010008706252 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| 10908275 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-870-6252
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | 0$DST8640$DST8740 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-T-00825 FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 3.5620 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 2.0620 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 3.5960 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 3.8522 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 3.7500 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 30 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 3.5620 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 2.5000 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 3.5960 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 3.8522 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 3.7500 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 30 |
| LARGEST STEP DIAMETER | 3.852 INCHES NOMINAL |
| OVERALL LENGTH | 7.281 INCHES NOMINAL |
| STEP QUANTITY | 9 |
| SPECIAL FEATURES | GROOVES LOCATED BOTH ENDS 0.120 IN.WIDE;FIRST END 0.182 IN.FROM END,SECOND END 0.494 IN.FROM END |