Part Details | SHOULDERED SHAFT
3040-00-880-4551 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 11601825, 3040-00-880-4551, 00-880-4551, 3040008804551, 008804551
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 15, 1967 | 00-880-4551 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLAT KEYWAY
PLAIN
FLAT KEYWAY
Cross Reference | NSN 3040-00-880-4551
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 11601825 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-880-4551
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | 5$6 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-637 FED SPEC ALL MATERIAL RESPONSES |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.8100 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 7 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.4700 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.6600 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.620 INCHES NOMINAL |
| SECOND END DIAMETER | 0.8730 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 1.310 INCHES MINIMUM |
| SECOND END SPLINE MINOR DIAMETER | 0.8310 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.8730 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 48 |
| LARGEST STEP DIAMETER | 0.873 INCHES NOMINAL |
| OVERALL LENGTH | 13.250 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | BOTH ENDS HAVE PARTIAL BORE,0.125 IN. DIA,0.360 IN. DP,CSK 60 DEG TO 0.312 IN. DIA |