Part Details | SHOULDERED SHAFT
3040-00-890-5974 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 13210, 13210, 3040-00-890-5974, 00-890-5974, 3040008905974, 008905974
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 10, 1968 | 00-890-5974 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLATTED
FLATTED
Cross Reference | NSN 3040-00-890-5974
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 13210 | 29236 | M-D PNEUMATICS INC |
| 13210 | 03951 | ROCKWELL INTL CORPGRAPHIC SYSTEMS DIV |
Technical Data | NSN 3040-00-890-5974
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 FLATTED |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-I-24137,SHIPS MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 20.0 MICROINCHES |
| FIRST END KEYWAY WIDTH | 0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| FIRST END EXTERNAL KEYWAY LENGTH | 2.235 INCHES NOMINAL |
| FIRST END KEYWAY DEPTH | 0.060 INCHES NOMINAL |
| FIRST END DIAMETER | 1.3700 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.750 INCHES NOMINAL |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 8.375 INCHES NOMINAL |
| OVERALL LENGTH | 21.137 INCHES NOMINAL |
| STEP QUANTITY | 11 |
| SPECIAL FEATURES | BOTH ENDS NO. 18 BELL CENTER 0.750 IN. DIA |