Part Details | SHOULDERED SHAFT
3040-00-891-1897 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 2481789, 2481789, 3040-00-891-1897, 00-891-1897, 3040008911897, 008911897
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 13, 1967 | 00-891-1897 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-891-1897
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2481789 | 5U074 | ACE G & M OF TEXAS INC.DBA ACE G & M OF TEXAS |
| 2481789 | 99551 | GOODRICH CORPORATIONDIV POWER TRANSMISSION SYSTEMS |
Technical Data | NSN 3040-00-891-1897
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 0.650 INCHES MINIMUM AND 0.660 INCHES MAXIMUM |
| FIRST END SPLINE MINOR DIAMETER | 0.5000 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 0.6000 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 12 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.850 INCHES MINIMUM AND 0.870 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 0.4800 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 0.6000 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 12 |
| LARGEST STEP DIAMETER | 0.830 INCHES MINIMUM AND 0.850 INCHES MAXIMUM |
| OVERALL LENGTH | 2.460 INCHES MINIMUM AND 2.480 INCHES MAXIMUM |
| STEP QUANTITY | 7 |
| END ITEM IDENTIFICATION | T-38 ACFT |