Part Details | SHOULDERED SHAFT
3040-00-893-8175 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 1142824, 114C2824, 3040-00-893-8175, 00-893-8175, 3040008938175, 008938175
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 23, 1967 | 00-893-8175 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TAPERED WITH FLAT
PLAIN
TAPERED WITH FLAT
Cross Reference | NSN 3040-00-893-8175
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1142824 | 05606 | GENERAL DYNAMICS-OTS, INC.DBA GD-OTS (WILLISTON) |
| 114C2824 | 05606 | GENERAL DYNAMICS-OTS, INC.DBA GD-OTS (WILLISTON) |
Technical Data | NSN 3040-00-893-8175
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 4140 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 COLD FIN 15-35 PERCENT FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.5002 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 5 TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.5000 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.1240 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.2180 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.8680 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 0.5000 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.750 INCHES NOMINAL |
| OVERALL LENGTH | 6.120 INCHES NOMINAL |
| STEP QUANTITY | 6 |
| SPECIAL FEATURES | 2 SPLINED SHOULDERS; 23 TEETH; 0.7188 PITCH DIA; 30 DEG PRESSURE ANGLE; 2 CROSS DRILL HOLES; 0.093 IN DIA FIRST END; 0.185 IN DIA SECOND END |