Part Details | SHOULDERED SHAFT
3040-00-905-0038 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 17442100, 174421, 3040-00-905-0038, 00-905-0038, 3040009050038, 009050038
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1960 | 00-905-0038 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-905-0038
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 17442100 | 15434 | CUMMINS INC. |
| 174421 | 15434 | CUMMINS INC. |
Technical Data | NSN 3040-00-905-0038
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 31.026 MFR REF SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END DIAMETER | 0.3200 INCHES MINIMUM AND 0.3520 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | PLAIN |
| SECOND END DIAMETER | 0.3600 INCHES MINIMUM AND 0.3700 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.450 INCHES MINIMUM AND 0.455 INCHES MAXIMUM |
| OVERALL LENGTH | 3.365 INCHES MINIMUM AND 3.385 INCHES MAXIMUM |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | HOLE DRILED IN SECOND END 0.160 IN. DIA BY 1.350 IN. DEEP |
| FSC APPLICATION DATA | FUEL INJECTOR,ENGINE,NON-AIRCRAFT |