Part Details | SHOULDERED SHAFT
3040-00-906-7258 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 65D352077, 65D35207-7, 3Q814C, 3Q814C, 3040-00-906-7258, 00-906-7258, 3040009067258, 009067258
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 22, 1966 | 00-906-7258 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-906-7258
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 65D35207-7 | 80049 | DEPARTMENT OF THE AIR FORCE |
| 3Q814C | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGEDORIGINAL DESIGN ACTIVITY NOT |
| 3Q814C | 98296 | STANDARD MFG CO INC |
Technical Data | NSN 3040-00-906-7258
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | 0$DST4140 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624,AISI FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 0.8750 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 6 CIRCULAR GROOVED |
| SECOND END KEYWAY WIDTH | 0.3125 INCHES NOMINAL |
| SECOND END EXTERNAL KEYWAY LENGTH | 1.312 INCHES NOMINAL |
| SECOND END KEYWAY DEPTH | 0.188 INCHES NOMINAL |
| SECOND END DISTANCE FROM KEYWAY CENTER TO END | 0.797 INCHES NOMINAL |
| SECOND END DIAMETER | 1.1860 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.2650 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 1.186 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.625 INCHES NOMINAL |
| OVERALL LENGTH | 6.687 INCHES NOMINAL |
| STEP QUANTITY | 4 |