Part Details | SHOULDERED SHAFT
3040-00-909-2455 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 10956454, 1025009092455, 3040-00-909-2455, 00-909-2455, 3040009092455, 009092455
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1960 | 00-909-2455 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
WOODRUFF KEYWAY
TAPERED WITH FLAT
WOODRUFF KEYWAY
Cross Reference | NSN 3040-00-909-2455
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 10956454 | 19204 | ARMY, UNITED STATES DEPARTMENT OFTHE |
| 1025009092455 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
Technical Data | NSN 3040-00-909-2455
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 TAPERED WITH FLAT |
| MATERIAL | 0$DST8740 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC ALL MATERIAL RESPONSES |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 1.5000 INCHES NOMINAL |
| FIRST END HOLE DIAMETER | 0.3750 INCHES NOMINAL |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 1 WOODRUFF KEYWAY |
| SECOND END KEYWAY WIDTH | 0.6030 INCHES NOMINAL |
| SECOND END EXTERNAL KEYWAY LENGTH | 0.186 INCHES NOMINAL |
| SECOND END KEYWAY DEPTH | 0.093 INCHES NOMINAL |
| SECOND END DIAMETER | 1.1230 INCHES NOMINAL |
| SECOND END ANGLE BETWEEN KEYWAYS | 180.0 DEGREES NOMINAL |
| LARGEST STEP DIAMETER | 1.625 INCHES NOMINAL |
| OVERALL LENGTH | 3.180 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | NICKEL-COATED; HOLE 0.375 LG X 0.250 W ON 1ST,2ND,AND 3RD STEPS; 1ST END BOED 1.000 DIA X 2.280 DEEP |
| END ITEM IDENTIFICATION | M110 HOWITZER FAMILY |
| FSC APPLICATION DATA | MOUNT,GUN,175 MM |