Part Details | SHOULDERED SHAFT
3040-00-913-0549 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 3151288, 3151288, 3040-00-913-0549, 00-913-0549, 3040009130549, 009130549
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1960 | 00-913-0549 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLAT KEYWAY
WOODRUFF KEYWAY
FLAT KEYWAY
WOODRUFF KEYWAY
Cross Reference | NSN 3040-00-913-0549
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3151288 | 77068 | ALLIED-SIGNAL INCDBA ALLIED-SIGNAL AEROSPACE CO |
| 3151288 | 59364 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
Technical Data | NSN 3040-00-913-0549
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | WOODRUFF KEYWAY |
| MATERIAL | STEEL COMP 440C |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END KEYWAY WIDTH | 0.0928 INCHES MINIMUM AND 0.0943 INCHES MAXIMUM |
| FIRST END EXTERNAL KEYWAY LENGTH | 0.500 INCHES NOMINAL |
| FIRST END DISTANCE FROM KEYWAY CENTER TO END | 0.320 INCHES NOMINAL |
| FIRST END DIAMETER | 0.4985 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 5 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.0300 INCHES MINIMUM AND 0.0330 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 0.4170 INCHES MINIMUM AND 0.4270 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.070 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| SECOND END KEYWAY WIDTH | 0.1270 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM |
| SECOND END EXTERNAL KEYWAY LENGTH | 0.945 INCHES MINIMUM AND 0.958 INCHES MAXIMUM |
| SECOND END KEYWAY DEPTH | 0.072 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
| SECOND END DIAMETER | 0.4980 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.1270 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.465 INCHES MINIMUM AND 0.475 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.562 INCHES NOMINAL |
| OVERALL LENGTH | 5.080 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | ANGLE BETWEEN KEYWAYS 180 DEG |