Part Details | SHOULDERED SHAFT
3040-00-926-3895 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 1114010, 11140-10, 11140, 3040-00-926-3895, 00-926-3895, 3040009263895, 009263895
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 24, 1967 | 00-926-3895 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-926-3895
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 11140-10 | 14632 | DRS SIGNAL SOLUTIONS, INC. |
| 11140 | 14632 | DRS SIGNAL SOLUTIONS, INC. |
Technical Data | NSN 3040-00-926-3895
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 0.1870 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0280 INCHES MINIMUM AND 0.0312 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 0.2300 INCHES MINIMUM AND 0.2320 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 1.002 INCHES MINIMUM AND 1.242 INCHES MAXIMUM |
| SECOND END DIAMETER | 0.1870 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| OVERALL LENGTH | 3.090 INCHES NOMINAL |
| STEP QUANTITY | 2 |