Part Details | SHOULDERED SHAFT
3040-00-938-0179 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 661310, 3040-00-938-0179, 00-938-0179, 3040009380179, 009380179
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 10, 1967 | 00-938-0179 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
CIRCULAR GROOVED
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-938-0179
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 661310 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NAVIGATION AND MARITIME SYSTEMS |
Technical Data | NSN 3040-00-938-0179
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COMP 303,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0620 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| FIRST END GROOVE DIAMETER | 0.0950 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 0.0780 INCHES MINIMUM AND 0.0830 INCHES MAXIMUM |
| FIRST END DIAMETER | 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0200 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.1090 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.085 INCHES NOMINAL |
| SECOND END DIAMETER | 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.170 INCHES NOMINAL |
| OVERALL LENGTH | 1.470 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | CHAMFER 45.0 DEG,0.010 D |
| FSC APPLICATION DATA | INERTIAL GUIDANCE SYSTEM |