Part Details | SHOULDERED SHAFT
3040-00-948-7409 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: A9340, A9340, 3040-00-948-7409, 00-948-7409, 3040009487409, 009487409
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 06, 1966 | 00-948-7409 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-948-7409
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| A9340 | 17472 | EATON CORPORATIONDIV FUEL & MOTION CONTROL SYSTEMS |
| A9340 | 72121 | EATON MOTOR SITE |
Technical Data | NSN 3040-00-948-7409
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| SURFACE FINISH | 64.0 MICROINCHES |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE DIAMETER | 0.2100 INCHES MINIMUM AND 0.2130 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.079 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.370 INCHES MINIMUM AND 0.373 INCHES MAXIMUM |
| OVERALL LENGTH | 1.187 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| FSC APPLICATION DATA | ACTUATOR,ELECTRO-MECHANICAL,ACFT |