Part Details | SHOULDERED SHAFT
3040-00-955-9613 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 56435, 3040-00-955-9613, 00-955-9613, 3040009559613, 009559613
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1962 | 00-955-9613 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
SPLINED (STRAIGHT)
PLAIN
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-955-9613
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 56435 | 93835 | PARKER-HANNIFIN CORPORATIONDBA HYDRAULIC SYSTEMS DIVISION |
Technical Data | NSN 3040-00-955-9613
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL COMP 17-4PH |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS-5643,COMP 17-4PH ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 0.812 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| FIRST END SPLINE MINOR DIAMETER | 0.5500 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM |
| FIRST END SPLINE QUANTITY | 12 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.781 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.5973 INCHES MINIMUM AND 0.6085 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 0.6875 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 11 |
| LARGEST STEP DIAMETER | 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| OVERALL LENGTH | 1.843 INCHES NOMINAL |
| STEP QUANTITY | 4 |