Part Details | SHOULDERED SHAFT
3040-00-993-7097 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 697823, 3040-00-993-7097, 00-993-7097, 3040009937097, 009937097
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 28, 1967 | 00-993-7097 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-993-7097
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 697823 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
Technical Data | NSN 3040-00-993-7097
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6244 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.1870 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.3120 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.4370 INCHES NOMINAL |
| FIRST END DIAMETER | 0.5620 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.6130 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.4220 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.5830 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.6130 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 0.5980 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 8 |
| LARGEST STEP DIAMETER | 1.075 INCHES NOMINAL |
| OVERALL LENGTH | 4.177 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| FSC APPLICATION DATA | HYDRAULIC SYSTEM AIRCRAFT |