Part Details | SHOULDERED SHAFT
3040-00-994-2737 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 453626, 3040-00-994-2737, 00-994-2737, 3040009942737, 009942737
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 30, 1967 | 00-994-2737 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLAT KEYWAY
PLAIN
FLAT KEYWAY
Cross Reference | NSN 3040-00-994-2737
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 453626 | 19139 | EASTMAN KODAK COMPANYDBA KODAK |
Technical Data | NSN 3040-00-994-2737
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | FLAT KEYWAY |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | EK 156 MFR REF SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END KEYWAY WIDTH | 0.1280 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM |
| FIRST END EXTERNAL KEYWAY LENGTH | 0.531 INCHES NOMINAL |
| FIRST END KEYWAY DEPTH | 0.065 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| FIRST END DIAMETER | 0.3750 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | PLAIN |
| SECOND END DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.0810 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.368 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 0.249 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.375 INCHES NOMINAL |
| OVERALL LENGTH | 4.750 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | BOTH ENDS CHAMFERED 0.031 IN. BY 45 DEG |