Part Details | SHOULDERED SHAFT
3040-00-994-2775 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 453728, 3040-00-994-2775, 00-994-2775, 3040009942775, 009942775
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 30, 1967 | 00-994-2775 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLAT KEYWAY
PLAIN
FLAT KEYWAY
Cross Reference | NSN 3040-00-994-2775
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 453728 | 19139 | EASTMAN KODAK COMPANYDBA KODAK |
Technical Data | NSN 3040-00-994-2775
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 2 PLAIN |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | EK-155 MFR REF SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| FIRST END EXTERNAL THREAD LENGTH | 0.330 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 6 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.0280 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 0.2285 INCHES MINIMUM AND 0.2315 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.063 INCHES NOMINAL |
| SECOND END DIAMETER | 0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| SECOND END SLOT DEPTH | 0.045 INCHES NOMINAL |
| SECOND END SLOT WIDTH | 0.062 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.500 INCHES NOMINAL |
| OVERALL LENGTH | 1.062 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | CHAMFERED 0.031 IN. BY 45 DEG BOTH ENDS |
| END ITEM IDENTIFICATION | EASTMAN KODAK CO VERSAMAT PROCESSOR MODEL 11C-L,11C-M,11C-MG |