Part Details | SHOULDERED SHAFT
3040-01-022-7698 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 7579127X3PC8, 75791-27X3PC8, 7379127X3PC8, 73791-27X3PC8, 3040-01-022-7698, 01-022-7698, 3040010227698, 010227698
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 05, 1976 | 01-022-7698 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
SPLINED (STRAIGHT)
PLAIN
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-01-022-7698
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 75791-27X3PC8 | 96169 | ELECTRIC BOAT CORPORATION |
| 73791-27X3PC8 | 96169 | ELECTRIC BOAT CORPORATION |
Technical Data | NSN 3040-01-022-7698
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-20166,TYPE A,GRADE M MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.3750 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 1.000 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.7480 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.6390 INCHES NOMINAL |
| FIRST END SPLINE QUANTITY | 10 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | PLAIN |
| SECOND END DIAMETER | 0.7480 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.1060 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.188 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 0.375 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.998 INCHES NOMINAL |
| OVERALL LENGTH | 8.188 INCHES NOMINAL |
| STEP QUANTITY | 4 |