Part Details | SHOULDERED SHAFT
3040-01-026-4015 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 234762, 234762, 3040-01-026-4015, 01-026-4015, 3040010264015, 010264015
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | AUG 22, 1976 | 01-026-4015 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-026-4015
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 234762 | 12603 | CLARK EQUIPMENT CO |
| 234762 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC |
Technical Data | NSN 3040-01-026-4015
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 2.50000 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 2.875 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 2.2210 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 2.4985 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 2.3750 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 19 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 2.7500 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 2.875 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 2.4710 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 2.7485 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 2.6250 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 21 |
| LARGEST STEP DIAMETER | 3.250 INCHES NOMINAL |
| OVERALL LENGTH | 15.875 INCHES NOMINAL |
| STEP QUANTITY | 7 |