Part Details | SHOULDERED SHAFT
3040-01-028-4015 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 2684627, 268462700, 2684627-00, 3040-01-028-4015, 01-028-4015, 3040010284015, 010284015
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 30, 1976 | 01-028-4015 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-028-4015
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2684627 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
| 2684627-00 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-028-4015
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 0.3680 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.1540 INCHES MINIMUM AND 0.1590 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 2.260 INCHES NOMINAL |
| FIRST END HOLE DEPTH | 0.609 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 PLAIN |
| SECOND END DIAMETER | 0.6090 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 1.740 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.609 INCHES NOMINAL |
| OVERALL LENGTH | 25.120 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | SECOND END OR MAJOR DIA END HAS AN INTERNAL 0.380 IN. SQUARE DRIVE |