Part Details | SHOULDERED SHAFT
3040-01-034-9926 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 962817101, 962817-101, 3040-01-034-9926, 01-034-9926, 3040010349926, 010349926
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | FEB 02, 1977 | 01-034-9926 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-034-9926
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 962817-101 | 98897 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
Technical Data | NSN 3040-01-034-9926
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 1.3750 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 1.3100 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 1.1870 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 1.3750 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 1.2810 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 43 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 1.7500 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 1.3100 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 1.5620 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 1.7500 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 1.6875 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 27 |
| LARGEST STEP DIAMETER | 1.750 INCHES NOMINAL |
| OVERALL LENGTH | 14.530 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| FSC APPLICATION DATA | TRANSMISSION GEARBOX |