Part Details | SHOULDERED SHAFT
3040-01-042-8623 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 112504, 3040-01-042-8623, 01-042-8623, 3040010428623, 010428623
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 16, 1977 | 01-042-8623 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
CIRCULAR GROOVED
TAPERED WITH FLAT
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-042-8623
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 112504 | 10138 | ASTRONAUTICS CORPORATION OF AMERICA |
Technical Data | NSN 3040-01-042-8623
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | TAPERED WITH FLAT |
| MATERIAL | STEEL CORROSION RESISTING |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END TAPER LENGTH | 0.440 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0290 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 0.1470 INCHES MINIMUM AND 0.1490 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.060 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.324 INCHES MINIMUM AND 0.326 INCHES MAXIMUM |
| OVERALL LENGTH | 2.000 INCHES NOMINAL |