Part Details | SHOULDERED SHAFT
3040-01-046-4873 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 73650, 3040-01-046-4873, 01-046-4873, 3040010464873, 010464873
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | AUG 18, 1977 | 01-046-4873 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
CIRCULAR GROOVED
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-046-4873
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 73650 | 24930 | HARRIS CORPORATIONDBA ELECTRONIC SYSTEMS, RADAR |
Technical Data | NSN 3040-01-046-4873
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | 2$3 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND A FED SPEC ALL MATERIAL RESPONSES |
| SURFACE FINISH | 20.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0310 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.2465 INCHES MINIMUM AND 0.2468 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 1.063 INCHES NOMINAL |
| FIRST END DIAMETER | 0.2495 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0310 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.2468 INCHES MINIMUM AND 0.2471 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.312 INCHES NOMINAL |
| SECOND END DIAMETER | 0.2498 INCHES MINIMUM AND 0.2501 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.297 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| OVERALL LENGTH | 2.531 INCHES NOMINAL |
| STEP QUANTITY | 3 |