Part Details | SHOULDERED SHAFT
3040-01-050-0837 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 615AS132, 3040-01-050-0837, 01-050-0837, 3040010500837, 010500837
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | OCT 31, 1977 | 01-050-0837 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
SPLINED (STRAIGHT)
INTERNAL THREADED
SPLINED (STRAIGHT)
INTERNAL THREADED
Cross Reference | NSN 3040-01-050-0837
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 615AS132 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGEDORIGINAL DESIGN ACTIVITY NOT |
Technical Data | NSN 3040-01-050-0837
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END DIAMETER | 1.7740 INCHES MINIMUM AND 1.7750 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 1.625 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 1.6450 INCHES MINIMUM AND 1.6550 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 1.7740 INCHES MINIMUM AND 1.7750 INCHES MAXIMUM |
| FIRST END SPLINE QUANTITY | 19 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 INTERNAL THREADED |
| SECOND END STEP LENGTH | 0.947 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 4.781 INCHES NOMINAL |
| OVERALL LENGTH | 5.598 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | FOUR THREADED HOLES, 0.375-24 UNF-2B, ON SECOND END; FLANGE DIA. 4.531 IN.; 0.531 IN. DIA. THRU BORE |
| END ITEM IDENTIFICATION | AN/ALE 41 DISPENSING SET |