Part Details | SHOULDERED SHAFT
3040-01-050-7288 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 30059055, 3005-9055, 3040-01-050-7288, 01-050-7288, 3040010507288, 010507288
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 13, 1977 | 01-050-7288 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLATTED
CIRCULAR GROOVED
FLATTED
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-050-7288
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3005-9055 | 30669 | E AND R ELECTRONICS INCDBA DUMONT OSCILLOSCOPE |
Technical Data | NSN 3040-01-050-7288
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | FLATTED |
| MATERIAL | STEEL |
| FIRST END FLAT DEPTH | 0.0230 INCHES NOMINAL |
| FIRST END FLAT LENGTH | 0.438 INCHES NOMINAL |
| FIRST END DIAMETER | 0.1230 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0700 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.0930 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.062 INCHES NOMINAL |
| SECOND END DIAMETER | 0.1280 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.310 INCHES NOMINAL |
| OVERALL LENGTH | 2.710 INCHES NOMINAL |
| STEP QUANTITY | 6 |