Part Details | SHOULDERED SHAFT
3040-01-051-5375 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 12265874, 12265874, 3040-01-051-5375, 01-051-5375, 3040010515375, 010515375
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 02, 1977 | 01-051-5375 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
SPLINED (STRAIGHT)
PLAIN
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-01-051-5375
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12265874 | 20418 | DRS SUSTAINMENT SYSTEMS, INC.Use CAGE Code 98255 for cataloging |
| 12265874 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-01-051-5375
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,COND F MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.625 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.3255 INCHES MINIMUM AND 0.3335 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.3910 INCHES MINIMUM AND 0.3960 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 12 |
| LARGEST STEP DIAMETER | 0.4365 INCHES MINIMUM AND 0.4750 INCHES MAXIMUM |
| OVERALL LENGTH | 4.000 INCHES NOMINAL |
| STEP QUANTITY | 2 |