Part Details | SHOULDERED SHAFT
3040-01-056-6181 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: S81491, 627757C1, 101821, 627757C1, ZA1133, 3040-01-056-6181, 01-056-6181, 3040010566181, 010566181
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | FEB 25, 1978 | 01-056-6181 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-056-6181
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| S81491 | 10988 | CNH INDUSTRIAL AMERICA LLC |
| 627757C1 | 29510 | KOMATSU AMERICAN INTL CO |
| 101821 | 29510 | KOMATSU AMERICAN INTL CO |
| 627757C1 | 92679 | NAVISTAR INTL CORPMELROSE PARK ENGINE PLANT LOCATION |
| ZA1133 | 13829 | PARKER-HANNIFIN, CORPORATIONDBA MOBILE CYLINDER DIVISION |
Technical Data | NSN 3040-01-056-6181
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL COMP 8620 |
| SURFACE FINISH | 100.0 MICROINCHES |
| FIRST END DIAMETER | 0.7204 INCHES MINIMUM AND 0.7254 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 0.828 INCHES MINIMUM AND 0.838 INCHES MAXIMUM |
| FIRST END SPLINE MINOR DIAMETER | 0.6453 INCHES MINIMUM AND 0.6543 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.7204 INCHES MINIMUM AND 0.7254 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 0.7083 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 17 |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 0.770 INCHES NOMINAL |
| OVERALL LENGTH | 1.875 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | BORE LG OF SHAFT,DIA 0.250 IN. |