Part Details | SHOULDERED SHAFT
3040-01-062-8580 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 1667513, 3040-01-062-8580, 01-062-8580, 3040010628580, 010628580
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUL 22, 1978 | 01-062-8580 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLATTED
FLATTED
Cross Reference | NSN 3040-01-062-8580
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1667513 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
Technical Data | NSN 3040-01-062-8580
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 FLATTED |
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END KEYWAY WIDTH | 0.1865 INCHES MINIMUM AND 0.1885 INCHES MAXIMUM |
| FIRST END EXTERNAL KEYWAY LENGTH | 1.938 INCHES NOMINAL |
| FIRST END KEYWAY DEPTH | 0.037 INCHES NOMINAL |
| FIRST END DIAMETER | 0.6080 INCHES MINIMUM AND 0.6180 INCHES MAXIMUM |
| FIRST END EXTERNAL THREAD LENGTH | 0.470 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 FLATTED |
| SECOND END KEYWAY WIDTH | 0.1870 INCHES NOMINAL |
| SECOND END EXTERNAL KEYWAY LENGTH | 0.626 INCHES NOMINAL |
| SECOND END KEYWAY DEPTH | 0.032 INCHES NOMINAL |
| SECOND END DIAMETER | 0.7250 INCHES MINIMUM AND 0.7350 INCHES MAXIMUM |
| SECOND END EXTERNAL THREAD LENGTH | 0.470 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.787 INCHES NOMINAL |
| OVERALL LENGTH | 11.531 INCHES NOMINAL |
| STEP QUANTITY | 15 |