Part Details | SHOULDERED SHAFT
3040-01-083-1137 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 7994976, 3040-01-083-1137, 01-083-1137, 3040010831137, 010831137
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 17, 1979 | 01-083-1137 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3040-01-083-1137
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7994976 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-01-083-1137
| Characteristic | Specifications |
|---|---|
| MATERIAL | 0$DST8720 |
| END SIMILARITY | NOT IDENTICAL |
| LARGEST STEP DIAMETER | 1.250 INCHES NOMINAL |
| OVERALL LENGTH | 4.440 INCHES NOMINAL |
| STEP QUANTITY | 6 |
| SPECIAL FEATURES | BOTH ENDS CHAMFERED 0.03 IN BY 45DEGREES. SHORT END 2D STEP SURFACE FINISHED TO 250 MICROINCHES. BOTH SIDES OF LARGE COLLAR FINISHED TO 125 MICROINCHES. LONG END HAS 0.125 IN DIAM HOLE BORED AXIALLY 2.500 IN DEEP,CENTERED AND INTERSECTS W/TRANSVERSE HOLE 0.125IN DIAM BORED THRU. EXTERNAL THREAD SIZE BOTH ENDS 0.750-16 UNF-2A,INTERNALTHD SIZE LONG END 0.125-27 NPTF. CASE HARDEN SURFACE TO ROCKWELL C58-36 |
| TEST DATA DOCUMENT | 19207-7994976 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| END ITEM IDENTIFICATION | 2320-00-051-0489 TRUCK WRECKER 5 TON 6X6 M816 |