Part Details | SHOULDERED SHAFT
3040-01-093-4073 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 31015543, 3101554-3, 3040-01-093-4073, 01-093-4073, 3040010934073, 010934073
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 17, 1980 | 01-093-4073 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-093-4073
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3101554-3 | 99193 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
Technical Data | NSN 3040-01-093-4073
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL CORROSION RESISTING |
| FIRST END DIAMETER | 0.2750 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.500 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.3085 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.4048 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 0.3750 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 12 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.3550 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.810 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.3920 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.4560 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 0.4375 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 14 |
| LARGEST STEP DIAMETER | 0.456 INCHES NOMINAL |
| OVERALL LENGTH | 22.5400 INCHES NOMINAL |
| STEP QUANTITY | 18 |
| SPECIAL FEATURES | 1ST END SPLINE GROOVED 0.1248 IN. DEEP;PARTIAL BORE 1ST END 0.195 IN. DIA;3 MTG HOLES 0.580 IN. FROM 1ST END,120 DEG APART 0.030 IN. DIA,THROUGH SHAFT |