Part Details | SHOULDERED SHAFT
3040-01-096-4578 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 729521, 1709857, 3040-01-096-4578, 01-096-4578, 3040010964578, 010964578
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 20, 1980 | 01-096-4578 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
CIRCULAR GROOVED
TONGUE
CIRCULAR GROOVED
TONGUE
Cross Reference | NSN 3040-01-096-4578
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 729521 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
| 1709857 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
Technical Data | NSN 3040-01-096-4578
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QC13.01-03,CLASS 4 MFR REF SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0420 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 1.0830 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.030 INCHES NOMINAL |
| FIRST END DIAMETER | 1.1250 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 TONGUE |
| SECOND END GROOVE WIDTH | 0.6250 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 1.1450 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.952 INCHES NOMINAL |
| SECOND END DIAMETER | 1.1450 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.703 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.0690 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.0703 INCHES NOMINAL |
| SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.563 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 24 |
| LARGEST STEP DIAMETER | 1.688 INCHES NOMINAL |
| OVERALL LENGTH | 4.396 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| END ITEM IDENTIFICATION | U/O CONSTANT SPEED DRIVE P/N 7115953 AIRCRAFT F15A |