Part Details | SHOULDERED SHAFT
3040-01-103-7173 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 2220071, 3040-01-103-7173, 01-103-7173, 3040011037173, 011037173
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 18, 1980 | 01-103-7173 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-103-7173
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2220071 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
Technical Data | NSN 3040-01-103-7173
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 0.6210 INCHES MINIMUM AND 0.6230 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 PLAIN |
| SECOND END DIAMETER | 0.3750 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.505 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.621 INCHES MINIMUM AND 0.623 INCHES MAXIMUM |
| OVERALL LENGTH | 6.500 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | FIRST END HAS TWO INDENTED FLATS,0.500 IN. FLAT LG,0.061 IN. FLAT DP,4.063 IN. DISTANCE FROM FLAT CENTERS TO END,180 DEG ANGLE BTWN FLATS;SECOND END HAS PARTIAL BORE,0.093 IN. DIA,1.250 IN. DP |