Part Details | SHOULDERED SHAFT
3040-01-105-3585 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 5428217, 3040-01-105-3585, 01-105-3585, 3040011053585, 011053585
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 20, 1980 | 01-105-3585 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
FLAT KEYWAY
TAPERED WITH FLAT
FLAT KEYWAY
Cross Reference | NSN 3040-01-105-3585
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5428217 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-105-3585
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 TAPERED WITH FLAT |
| MATERIAL | STEEL CORROSION RESISTING |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END DIAMETER | 0.3147 INCHES MINIMUM AND 0.3150 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.0940 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.312 INCHES MINIMUM AND 0.343 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 7 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.0290 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 0.2880 INCHES MINIMUM AND 0.2920 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.560 INCHES NOMINAL |
| SECOND END DIAMETER | 0.2790 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.500 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.2349 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 16 |
| LARGEST STEP DIAMETER | 0.390 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| OVERALL LENGTH | 4.440 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | ONE 0.029 IN. MIN,0.032 IN. MAX WBY 0.288 IN. MIN,0.292 IN. MAX DIA GROOVE LOCATED 1.130 IN. MIN,1.132 IN.MAX FROM FIRST END |