Part Details | SHOULDERED SHAFT
3040-01-106-4048 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 6835558, 3040-01-106-4048, 01-106-4048, 3040011064048, 011064048
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 17, 1981 | 01-106-4048 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-106-4048
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 6835558 | 73342 | ALLISON TRANSMISSION, INC. |
Technical Data | NSN 3040-01-106-4048
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 2.0625 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 1.078 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 1.9375 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 2.0625 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 2.0000 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 32 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 2.4500 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 1.688 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 2.0500 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 2.4500 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 2.2500 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 24 |
| LARGEST STEP DIAMETER | 2.450 INCHES NOMINAL |
| OVERALL LENGTH | 7.250 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | BORE THROUGH SHAFT;EACH END IS SPLINED WITH A BUSHING |