Part Details | SHOULDERED SHAFT
3040-01-106-6619 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 12298334, 3040-01-106-6619, 01-106-6619, 3040011066619, 011066619
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 22, 1981 | 01-106-6619 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
TAPERED WITH FLAT
Cross Reference | NSN 3040-01-106-6619
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12298334 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-01-106-6619
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 TAPERED WITH FLAT |
| MATERIAL | STEEL COMP 1010 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A108 MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.9300 INCHES MINIMUM AND 0.9420 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.1240 INCHES MINIMUM AND 0.1290 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 1.298 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 6 TAPERED WITH FLAT |
| SECOND END KEYWAY WIDTH | 0.1863 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM |
| SECOND END EXTERNAL KEYWAY LENGTH | 0.770 INCHES NOMINAL |
| SECOND END DISTANCE FROM KEYWAY CENTER TO END | 0.630 INCHES NOMINAL |
| SECOND END DIAMETER | 0.7490 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.1870 INCHES MINIMUM AND 0.1920 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.340 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 0.7490 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.930 INCHES MINIMUM AND 0.942 INCHES MAXIMUM |
| OVERALL LENGTH | 5.500 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | 1ST END HAS IDENTICAL UNTHREADED CROSS DRILLED HOLE;0.292 IN CENTER TO CENTER FROM 1ST HOLE;1ST END ALSO HAS SLOT 1.060 IN LENGTH;0.1895 IN WIDTH; 1.421 IN FROM CENTER OF SLOT TO END |