Part Details | SHOULDERED SHAFT
3040-01-111-1784 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 167C23043, 167C2304-3, 167C23042, 167C2304-2, 167C2304, 3040-01-111-1784, 01-111-1784, 3040011111784, 011111784
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 12, 1981 | 01-111-1784 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TAPERED WITH FLAT
PLAIN
TAPERED WITH FLAT
Cross Reference | NSN 3040-01-111-1784
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 167C2304-3 | 05606 | GENERAL DYNAMICS-OTS, INC.DBA GD-OTS (WILLISTON) |
| 167C2304-2 | 05606 | GENERAL DYNAMICS-OTS, INC.DBA GD-OTS (WILLISTON) |
| 167C2304 | 05606 | GENERAL DYNAMICS-OTS, INC.DBA GD-OTS (WILLISTON) |
Technical Data | NSN 3040-01-111-1784
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 0.9063 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 1.500 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.8125 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.9063 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 0.8750 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 28 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.6200 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.1270 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.500 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.9063 INCHES NOMINAL |
| OVERALL LENGTH | 2.500 INCHES NOMINAL |
| STEP QUANTITY | 2 |