Part Details | SHOULDERED SHAFT
3040-01-112-0933 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 13216E61422, 13216E6142-2, 13216E6142, 3040-01-112-0933, 01-112-0933, 3040011120933, 011120933
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 26, 1981 | 01-112-0933 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
TONGUE
TAPERED WITH FLAT
TONGUE
Cross Reference | NSN 3040-01-112-0933
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 13216E6142-2 | 97403 | CECOM LR CENTER |
| 13216E6142 | 97403 | CECOM LR CENTER |
Technical Data | NSN 3040-01-112-0933
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 4 TAPERED WITH FLAT |
| MATERIAL | STEEL COMP 1113 |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISIB1113 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END FLAT LENGTH | 0.750 INCHES NOMINAL |
| FIRST END DIAMETER | 0.9900 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.5000 INCHES NOMINAL |
| FIRST END HOLE DEPTH | 0.1875 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 0 TONGUE |
| SECOND END FLAT DEPTH | 0.1198 INCHES NOMINAL |
| SECOND END FLAT LENGTH | 0.7500 INCHES NOMINAL |
| SECOND END GROOVE WIDTH | 0.0900 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.4550 INCHES MINIMUM AND 0.4750 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.9100 INCHES NOMINAL |
| SECOND END DIAMETER | 0.4995 INCHES MINIMUM AND 0.4998 INCHES MAXIMUM |
| SECOND END INTERNAL THREAD LENGTH | 0.062 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| OVERALL LENGTH | 5.280 INCHES NOMINAL |
| STEP QUANTITY | 2 |