Part Details | SHOULDERED SHAFT
3040-01-112-8118 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 716360, 3040-01-112-8118, 01-112-8118, 3040011128118, 011128118
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 10, 1981 | 01-112-8118 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLAT KEYWAY
FLAT KEYWAY
Cross Reference | NSN 3040-01-112-8118
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 716360 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
Technical Data | NSN 3040-01-112-8118
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 1 FLAT KEYWAY |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-STD-163 MIL STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0600 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.0300 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.078 INCHES NOMINAL |
| FIRST END DIAMETER | 0.8120 INCHES NOMINAL |
| FIRST END HOLE DIAMETER | 0.1890 INCHES NOMINAL |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.708 INCHES NOMINAL |
| FIRST END HOLE DEPTH | 0.251 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 5 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.0390 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.0610 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.072 INCHES NOMINAL |
| SECOND END KEYWAY WIDTH | 0.1260 INCHES NOMINAL |
| SECOND END EXTERNAL KEYWAY LENGTH | 0.469 INCHES NOMINAL |
| SECOND END KEYWAY DEPTH | 0.155 INCHES NOMINAL |
| SECOND END DIAMETER | 0.5610 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.561 INCHES NOMINAL |
| OVERALL LENGTH | 2.244 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | HOLE THRU LENGTH OF SHAFT |
| END ITEM IDENTIFICATION | AIRCRAFT EF111A |
| FSC APPLICATION DATA | DRIVE,CONSTANT SPEED,HYDRAULIC |