Part Details | SHOULDERED SHAFT
3040-01-113-1210 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 122951062, 12295106-2, 3040-01-113-1210, 01-113-1210, 3040011131210, 011131210
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 16, 1981 | 01-113-1210 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TAPERED WITH FLAT
PLAIN
TAPERED WITH FLAT
Cross Reference | NSN 3040-01-113-1210
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12295106-2 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-01-113-1210
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 0.8650 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.6100 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.1250 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.865 INCHES MINIMUM AND 0.870 INCHES MAXIMUM |
| OVERALL LENGTH | 5.430 INCHES MINIMUM AND 5.450 INCHES MAXIMUM |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | 1.75IN.FROM 1ST END IS A GROOVE 1.250IN. LGTH,0.435IN. DEPTH,ON A 45 DEGREE LEFT ANGLE |