3040011131212, 3040-01-113-1212, 12295104, 3040-01-113-1212 - SHOULDERED SHAFT

Part Details | SHOULDERED SHAFT

3040-01-113-1212 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Alternate Parts: 12295104, 3040-01-113-1212, 01-113-1212, 3040011131212, 011131212

Supply Group (FSG)	NSN Assigned	NIIN	Item Name Code (INC)
30	MAY 16, 1981	01-113-1212	22914 ( SHAFT, SHOULDERED )

REFERENCE DRAWINGS & PICTURES

TAPERED WITH FLAT

Cross Reference | NSN 3040-01-113-1212

Part Number	Cage Code	Manufacturer
12295104	19207	U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM

Technical Data | NSN 3040-01-113-1212

Characteristic	Specifications
FIRST END STYLE	3 TAPERED WITH FLAT
MATERIAL	STEEL COMP 1010
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM-A108 MIL SPEC SINGLE MATERIAL RESPONSE
FIRST END DIAMETER	0.4920 INCHES MINIMUM AND 0.5020 INCHES MAXIMUM
FIRST END HOLE DIAMETER	0.1250 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM
FIRST END DISTANCE FROM HOLE CENTER TO END	0.250 INCHES NOMINAL
END SIMILARITY	IDENTICAL
LARGEST STEP DIAMETER	0.865 INCHES MINIMUM AND 0.870 INCHES MAXIMUM
OVERALL LENGTH	6.125 INCHES NOMINAL
STEP QUANTITY	2
SPECIAL FEATURES	THREADED CROSS DRILL HOLE LOCATEDIN MAIN BODY 0.875IN.FROM 1ST END TO CENTER HOLE;0.250IN. THREAD DEPTH; 0.3125IN. DIAMETER