Part Details | SHOULDERED SHAFT
3040-01-113-8333 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 12293313, 12293313, 3040-01-113-8333, 01-113-8333, 3040011138333, 011138333
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 05, 1981 | 01-113-8333 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
WOODRUFF KEYWAY
PLAIN
WOODRUFF KEYWAY
Cross Reference | NSN 3040-01-113-8333
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12293313 | 18876 | U S ARMY AVIATION AND MISSILECOMMAND |
| 12293313 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-01-113-8333
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 0 PLAIN |
| MATERIAL | STEEL COMP 17-4PH |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 0.3700 INCHES NOMINAL |
| FIRST END SLOT DEPTH | 0.190 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| FIRST END SLOT WIDTH | 0.190 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 WOODRUFF KEYWAY |
| SECOND END DIAMETER | 0.2460 INCHES MINIMUM AND 0.2480 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.0600 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.203 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 0.080 INCHES NOMINAL |
| SECOND END DISTANCE BETWEEN HOLE CENTERS | 0.0001 INCHES NOMINAL |
| SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL |
| LARGEST STEP DIAMETER | 0.3700 INCHES NOMINAL |
| OVERALL LENGTH | 1.190 INCHES NOMINAL |
| STEP QUANTITY | 6 |
| SPECIAL FEATURES | FIRSTEND HOLE 0.188 DIA 0.122 DEEP AND SECOND END HOLES CSK 100 DEG |