Part Details | SHOULDERED SHAFT
3040-01-116-1892 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: L340004104, 3040-01-116-1892, 01-116-1892, 3040011161892, 011161892
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUL 22, 1981 | 01-116-1892 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLAT KEYWAY
PLAIN
FLAT KEYWAY
Cross Reference | NSN 3040-01-116-1892
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| L340004104 | 36090 | LOCKHEED MARTIN LIBRASCOPECORP |
Technical Data | NSN 3040-01-116-1892
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 0 FLAT KEYWAY |
| MATERIAL | STEEL COMP 303 |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0600 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.1876 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.340 INCHES NOMINAL |
| FIRST END DIAMETER | 0.2500 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.340 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | PLAIN |
| SECOND END DIAMETER | 0.2500 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.310 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| OVERALL LENGTH | 29.500 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | THDS ON FIRST END 20.0 NC-2A |