Part Details | SHOULDERED SHAFT
3040-01-118-8706 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 12309943, 3040-01-118-8706, 01-118-8706, 3040011188706, 011188706
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 13, 1981 | 01-118-8706 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
INTERNAL THREADED
PLAIN
INTERNAL THREADED
Cross Reference | NSN 3040-01-118-8706
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12309943 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-01-118-8706
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | COPPER ALLOY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 ALLOY NO.172 COND A FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.0930 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | INTERNAL THREADED |
| SECOND END DIAMETER | 0.1870 INCHES MINIMUM AND 0.1930 INCHES MAXIMUM |
| SECOND END INTERNAL THREAD LENGTH | 0.380 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.187 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| OVERALL LENGTH | 7.810 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | THREADED END HAS THREADS PER 0.164-32UNC-2B; 1 SHOULDER THREAD 0.164-32UNC-2A; FIRST END HAS AN UNTHREADED HOLE DRILLED INTO THE END 0.063 INCH IN DIA BY 0.156 INCH DEEP |