Part Details | SHOULDERED SHAFT
3040-01-119-0601 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 01011103, 01-011103, 10106785, 3040-01-119-0601, 01-119-0601, 3040011190601, 011190601
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 16, 1981 | 01-119-0601 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-119-0601
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 01-011103 | 81982 | HYDRO-AIRE, INC. |
| 10106785 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
Technical Data | NSN 3040-01-119-0601
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 0 PLAIN |
| MATERIAL | STEEL COMP 17-4PH |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 8.0 MICROINCHES |
| FIRST END DIAMETER | 0.1980 INCHES NOMINAL |
| FIRST END SLOT DEPTH | 0.055 INCHES NOMINAL |
| FIRST END SLOT WIDTH | 0.047 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 0 PLAIN |
| SECOND END DIAMETER | 0.1560 INCHES NOMINAL |
| SECOND END SLOT DEPTH | 0.725 INCHES NOMINAL |
| SECOND END SLOT WIDTH | 0.023 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.198 INCHES NOMINAL |
| OVERALL LENGTH | 2.580 INCHES NOMINAL |
| STEP QUANTITY | 12 |
| SPECIAL FEATURES | FIRST END HAS THD CROSS DRILLED THRU HOLE 0.160 IN. DISTANCE FROM HOLE C TO END;FIRST END BORED 0.050 IN. DIA 0.240 IN. DP,COUNTERBORED 0.109 IN. DIA 0.090 IN. DP;FIRST END HAS TWO CAM LOBES EA 0.070 IN. W,EA CAM LOBE HAS A THD CROSS DRILLED THRU HOLE 0.300 IN. DISTANCE FROM THD HOLE C TO END 0.135 IN. DISTANCE BTWN THD HOLE C |